Type: Driver
File Name:
File Size: 7.8 MB
123 (4.36)
Downloads: 81
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* (*Free Registration Required)

Download Now

Otherwise, it will operate at single channel mode.

If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward. PCI slots: PCIE slots: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the ASRock H61M-PS2 before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis.

Will asus gtx 750 ti fit on my motherboard asrock h61m ps2

Remove the bracket facing the slot ASRock H61M-PS2 you intend to use. Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card to the chassis with screws.

  • Asrock H61M-PS2 drivers
  • ASRock H61M-PS2 Atheros Lan driver - Windows XP/Vista/7 32/64bit ASRock
  • ASRock H61M-PS2 - motherboards specifications.
  • Drivers and utilities for motherboards ASRock:
  • To search drivers or utilities, select the motherboard model:
  • Asrock H61M-PS2 драйверы

Replace the system cover. Please refer to the following steps to set up a multi monitor ASRock H61M-PS2 Please refer to page 19 for proper expansion card installation procedures for details. VGA port 3.

Boot your system. Press or to enter UEFI setup. Please make sure that the value you select is less than the total capability of the system memory. If you have installed ASRock H61M-PS2 drivers already, there is no need to install them ASRock H61M-PS2.

ASRock H61M-PS2 Motherboard - ASRock :

Set up a multi-monitor display. When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary. Select the display icon identified by the number 2. Repeat steps C through E for the diaplay icon identified by the number one, two and three. Repeat steps A through C for the display ASRock H61M-PS2 identified by the number three. Use multi monitor.

Latest ASRock H61M-PS2 Motherboard Drivers

Click and drag the display icons to positions representing the physical ASRock H61M-PS2 of your monitors that you would like to use. The placement of display icons determines how you move items from one monitor to another.

To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. ASRock H61M-PS2 NOT place jumper caps over these headers and connectors.

Biostar A58M Ver. 6.3 AMD AHCIAsrock H61M-PS2 BIOS Publisher's Description
Airis N1217 TPMASRock H61M-PS2 VIA high definition audio driver
Accton EN1208TCAdded to Cart

Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! USB 2. Each USB 2. Please follow the instruction in our ASRock H61M-PS2 and chassis manual to install your system.


ASRock H61M-PS2 Note the positive and negative pins before connecting the cables. Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart. Connect to the power status indicator on the chassis ASRock H61M-PS2 panel. The LED is on when the system is operating.


The LED keeps blinking when the system is in S1 sleep state. Connect to the hard drive activity LED on the ASRock H61M-PS2 front panel. The LED is on when the hard drive is reading or writing data.


A front panel module mainly consists of power ASRock H61M-PS2, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly. H61M-PS2.

Solid Capacitor for CPU power; Supports Intel® K-Series CPU; Supports Dual Channel DDR3 ; Supports Intel® HD Graphics with Built-in. Solid Capacitor for CPU power. - Supports Intel® K-Series ASRock H61M-PS2. - Supports Dual Channel DDR3 - Supports Intel® HD Graphics with Built-in Visuals.

Related Drivers