Type: Driver
File Name:
File Size: 5.0 MB
84 (4.82)
Downloads: 47
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Dual channel Interleaved mode.


This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be Intel DQ87PG Desktop Board. If different speed DIMMs are used between channels, the slowest memory timing will be used. Single channel Asymmetric mode. This mode is equivalent to single channel bandwidth operation for real world applications.

HP EliteBook 745 G2 Gobi 4G ModemSpecifications
Plextor PX-LB950SA Blu-ray PlayerMore Views
HP Mini 210-2070nr NotebookSupport Game Debate
Acer Power F1F1b LANFind support for related products
Acer Aspire 7736Z Realtek AudioQuick Overview

This mode is used when only a Intel DQ87PG Desktop Board DIMM is installed or the memory capacities are unequal. Technology and device width can vary from one channel to the other. This mode provides the most flexible performance characteristics.


The bottommost DRAM memory the memory that is lowest within the system memory map is mapped to dual channel operation; the topmost DRAM memory the memory that is nearest to the 8 Intel DQ87PG Desktop Board address space limitif any, is mapped to single channel operation. Flex mode results in multiple zones of dual and single channel operation across the whole of DRAM memory. To use flex mode, it is necessary to populate both channels. For information about Memory Configuration Examples Refer to: All ports are high-speed, full-speed, and low-speed capable.

The port arrangement is as follows: Two ports are implemented with stacked back panel connectors Six front panel ports are implemented through three dual-port internal Intel DQ87PG Desktop Board NOTE Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device is attached to the cable. Use a shielded cable that meets the requirements for full-speed devices. A point-to-point interface is used for host to device connections. Extensions to Serial ATA 1.

Intel Desktop Board DQ87PG - PDF

For more information, see: It allows configuration of a computer system with the advantage of having HDDs for maximum storage capacity with system performance at or near SSD performance levels. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power Intel DQ87PG Desktop Board extends the life of the battery. Replace the battery with an equivalent one.

What's missing? Tell us about it.

Figure 1 on page 13 shows the location of the battery. Intel DQ87PG Desktop Board audio subsystem supports the following features: Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port. Windows 7 Ultimate and Windows 8 Pro certification.


Table 6 lists the supported functions of the front panel and back panel audio jacks. For information about Refer to Obtaining audio software and drivers Section 1. The component-side audio headers include front panel audio a 2 x 5-pin header that provides mic in and line out signals for front panel audio connectors.

Intel HD Graphics Driver for Windows 7/8 bit Driver - TechSpot

The available configurable back panel audio connectors are shown in Figure 4. Poor audio quality occurs if passive non-amplified speakers are connected to this output. The subsystem is capable of driving a speaker load of 8 Ohms at 1 W rms or 4 Ohms at 1. Blinking LAN activity is occurring. The board has several hardware management features, including the following: Thermal and voltage monitoring Chassis intrusion detection Hardware Monitoring The hardware monitoring and fan control subsystem is based on the Nuvoton NCT device, which supports the following: For information about Refer to The functions of the fan headers Sectionpage Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is removed.

Intel DQ87PG Desktop Board

The security feature uses a mechanical switch on the chassis that attaches to the chassis intrusion header. When the chassis cover is removed, the mechanical switch is in the closed position. For information about Refer to The location of the chassis intrusion header Figure 10, page 50 30 31 Product Description Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Thermal Sensors and Fan Headers 31 32 Intel Desktop Board DQ87PG Technical Product Specification Intel DQ87PG Desktop Board vpro Technology Intel vpro Technology is a set of processor and platform capabilities designed to enable greater proactive security, enhanced maintenance, and improved remote management both inside and outside the corporate firewall.

With Intel AMT, IT organizations can easily get accurate platform information, and can perform remote updating, diagnostics, debugging and repair of a system, regardless of the state of the operating system or the power Intel DQ87PG Desktop Board of the system.

The Intel Active Management Technology subsystem consists of: Programmable policies Operating system lock-up alert Boot failure alert Hardware failure alerts Third party non-volatile storage that prevents users from removing critical inventory, remote control, or virus protection agents. Intel® Desktop Board DQ87PG quick reference guide including specifications, features, pricing, compatibility, design documentation, ordering codes, spec.

Intel® Management Engine Firmware 9.x Update for Intel® Desktop Board DQ87PG and DB85FL. This utility updates the Intel® Management Engine Firmware.

Related Drivers