DRIVERS: XEROX PRINTER WORKCENTRE XD125F
XEROX PRINTER WORKCENTRE XD125F DRIVER DETAILS:
|File Size:||126.5 KB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
XEROX PRINTER WORKCENTRE XD125F DRIVER
The Toner Save feature is best used for draft copies and not for anything you want to distribute.
Xerox WorkCentre XDF Toner Cartridges
Fortunately, Xerox realized this and the XDf will reset all setting to it programmed defaults after 1 minute of inactivity. As a printer, the XDf connects XEROX Printer WorkCentre XD125f your Wintel machine through a parallel cable. Having a maximum resolution of x dpi, the XDf prints decent monochrome text and graphics. If that doesn't work you can try using a rubber rejuvenator product on the rollers. Over time the rollers get hard and the rejuvenator basically moisturizes it. Answered on Mar 07, A band of dry toner appears on each copy Three possible problems. You also might want to avoid the thinner, cheaper copier papers. Xerox lists the copy speed as part of the model number for its WorkCentre XD products. Up to one-sided copies can be made of a single-sided XEROX Printer WorkCentre XD125f, with copying speeds at 12 pages per minute.
The XDf has a document feeder that allows up to sheets to be collated for one copy. Do not remove paper through the bypass. Unfused toner may adhere in the area, resulting in smudged copies.
Carefully remove the misfed paper in the direction shown. Lower the right side tray 2 access door. Remove the misfed paper.
20 Most Recent Xerox WorkCentre XDF All-In-One Laser Questions & Answers - Fixya
Close the access door. If paper cannot be removed, skip to the Fuser Area. Closer the side cover. The fuser area is hot. Take care when removing paper from the fuser area. Pull down on the fuser lever. Do not pull paper up through the fusing unit. Remove the sheet of XEROX Printer WorkCentre XD125f, in the direction shown.
Xerox WorkCentre XD125F Toner Cartridges
Push up on the fuser lever. Close the side cover.
Press the front cover release buttons to open the front cover. Turn the knob in the direction of the arrow to XEROX Printer WorkCentre XD125f the paper to the exit area. Gently pull the paper out through the exit area. Close the front cover and side cover.
Approximately 10 more copies can be made, but you should have a replacement cartridge in stock. When the J1 status code is displayed, the machine will stop operating until the toner cartridge is replaced. Press down on the green lever on the front of the old toner cartridge and pull the cartridge out.
- Xerox WorkCentre XDf Toner Cartridges For Sale
- Printer Supplies for the Xerox Workcentre XD F from The Ink Shop
- Xerox WorkCentre XD125F user manual
- Xerox Workcentre XD120f Error message H 4
- Ask a Question
Help the environment by recycling your used toner cartridge. Refer to XEROX Printer WorkCentre XD125f recycling brochure packed with the Toner Cartridge for details. Shake the new toner cartridge horizontally four or five times and then remove the cover. Slide XEROX Printer WorkCentre XD125f new toner cartridge in until it locks in place. Product support for WorkCentre XDf Digital Copier - Laser Printer. Product documentation for WorkCentre XDf Digital Copier - Laser Printer.